BARNES ASSOCIATES

JOSEPH D. BARNES, P.E. CONSULTING ENGINEER

900 Market Street, Meadville, Pa. 16335 U.S.A.

Engineering Software

BEAUTYFLO® SYSTEM (PIPING)
COMBUSTION
CONCURVE
     Free program offer,  (Convert.exe)
HVAC
MECHANICAL
THERMAL PROCESS
REFRACTORY
  Check our "ORDER" page for  NEW  internet pricing

PH 814-724-4615
E-Mail  jdbarnes@zoominternet.net

 

    User friendly programs provide easy solutions for engineering design applications, including PIPING, COMBUSTION, HVAC, MECHANICAL, THERMAL PROCESS, AND REFRACTORY SYSTEMS.

  Specialized engineering knowledge, scientific data, and complicated equations and formulas are transformed into easy-to-use programs. Inclusion of numerous pre-programmed values eliminates the need to consult outside references for many physical properties- thus freeing you from tedious and non-productive work. And you don't have to learn any abbreviated symbols or code letters to run the programs. In addition to providing solutions for new projects, the programs provide data to help analyze and improve existing systems based on present day computer technology, to save energy and utility costs.

  Worldwide firms using these programs include leaders in aluminum, automotive, chemical, electronic, machinery, petroleum, paper and steel, as well as piping contractors, consulting engineers, universities, public works and energy engineers.

  The programs employ design and engineering knowledge acquired over many years. After graduating from Penn State (BSME), my engineering experience started when I designed a 100' (30m) high continuous aluminum strip annealing furnace for Alcoa while employed as a design engineer at Westinghouse. I was employed at North American Mfg. Co. wherein I gained "hands-on" service experience developing and operating gas and oil-fired combustion equipment. I was then a project engineer at Sunbeam Equipment designing electric and fuel-fired metallurgical heat treating furnaces and related piping, material handling equipment, and generators - including five - 25,000 cfh (708 m/h) Hymonogas® (10% H2 / 90% N2) units for US Steel Dravosburg. I was one of four partners in an Architectural-Engineering firm doing the mechanical and electrical engineering designs with three architects for commercial & industrial projects.

  My consulting engineering practice specializes in industrial thermal process equipment design, piping, material handling, combustion, insulation, hvac, energy analysis and heat recovery. Development of these computer programs have evolved into professional and practical solutions for many plant engineering equipment design problems. Thousand's of hours have been spent developing and upgrading the programs, to be sure they are de-bugged, accurate, and entirely suitable for the intended engineering design application.

Thanks for visiting,

Joseph D. Barnes P.E.



PS ... Check the "CONCURVE" page for a free software offer.


   For viewing and navigation around our site, italics are used as navigational aids and a screen resolution of 1024 x 768 or better is recommended. Links to my program descriptions are beside my picture on this page and at the top of all the pages in this web site. The "ORDER PAGE"  can be accessed from the bottom of each program description page. Each page describing a program has a series of screen examples (where my picture is on this page) for certain features of a program, so you get a look and feel for what the programs are like during use.


   A 12 PAGE BROCHURE (WITH TWO-4 PAGE SUPPLEMENTS) IS AVAILABLE WHICH DESCRIBES ALL PROGRAMS IN DETAIL, WITH SELECTED PRINTOUTS OF SOLUTIONS. Complete the following BROCHURE FORM for the literature.

BROCHURE FORM (E-Mail a completed form for the literature-be sure completed form is readable for electronic transmission)

 Company/Firm:

 

Your Name:

 

Title:

 

Address:

 

City:

 

State:

 

zip:

 

Country:

 

Phone:

 

Fax:

 

 E-Mail:

 





Web pages by....LdL Enterprise
  For comments or corrections to these pages please contact  "jB"

©J.D.Barnes 2005-5-5