Colt 9mm Magazine Well Pinning / Troubleshooting


Send me your one or two piece Magazine Well Adapter and I can either pin them or screw them in place. I can assemble your entire gun or take your assembled gun and trouble shoot it.

Roll pin holes can be drilled (un finished) like Colt does it or I can Air Brush a Baked on Flat Black Moly that looks like the original black finish of the "black" guns.

Two piece adapter installed (pictures below).  To make sure the adapter halves stay tight, I do not use the existing roll pin holds in the adapter halves.  I drill three new holes.



One piece adapter screwed in place:



Colt 9mm SMG two piece adapter: