UZI TOP COVER OPTIC RAILS
5/8" Tall by 3.3" long type:
Rails are manufactured to mil. spec. 1913 specifications. They are for the Full Size UZI. Your cocking knob works just like it always did. The Top Covers have a milled pad for the rail system to nest and locate. The milled pad is parallel with your barrel. Rail is held on by two 10-32 Grade Eight Socket Flat Head Screws. Thread lock is applied to the screws and the screws can be tack welded on as well. Dark Parkarized finish.
1 3/4" Small Optic Rails:
Optic rails are 1 3/4" long manufactured to mil. spec. 1913 specifications. The rail is located in two .300 diameter x .020" deep counter bores in the top cover. Two 10-32 grade 8 tapered flat head screws hold it on. Thread lock is applied to the screws and the screws can be tack welded on as well. The rail base is actually a slip fit into the top cover counter bores. The counter bored nests are parallel with your barrel therefore so is your rail. Dark Parkarized finish.
I can manufacture both style rails so you can use the peep's as well as the optics. These cost a little more. e-mail me what you're looking for....
Click here to see a easy way of removing the "slop" between your Top Cover and your Receiver
See thru Mount- Mini UZI and Full Size UZI Top Covers shown
Non Co-Witnessing J-Point Optic on a low (3/8") Rail
Mini Rail with JP Optic Full size UZI with 3" rail w/Dr Optic Full size with 3" rail w/EOTECH
Mini with JP Optic Full size rail Aimpoint w/ quick detach
Full size with IKO optic Mini with JP Optic
Full size with BSA Optic Full size with OKO Full size with EOTECH