Barrel Threading / Adapters
Adapter added for Ruger MKII
Attaching 3 Lug adapters to Barrels
-3 Lug Adapters in stock
Single pointed threads using a CNC Lathe. Whatever thread pitch you would like. Right hand, left hand, metric, or American threads.
For barrels that do not remove easily or receivers/barrels that might have the finish damaged while removing the barrel, I can thread without having to remove the barrel from the receivers. I CNC the profile of your chamber on a non reusable threading arbor. The arbors can be stepped for clearance (AC556/Mini14's) or straight.
(AC556/Mini14, MP5, Rem 700's...etc..)
References available upon request.
Remington 700 Police with a Quick Detach Gemtech HVT 7.62/.308 Supressor
.308 Whisper barrel - Added the Picatinny Rail (the bottom of rail is the same as the diameter as the barrel) and threaded the barrel.
MP5 - Barrel not removed from the receiver.
FAL
MP5 threaded for a 3 lug. The barrel was not removed from the receiver.
5/8-18 Left Hand to 1/2-28 Adapter made in one set up yields no "run out".
Misc. Machining
-Thread Adapters, thread protectors, barrel threading
-Custom Machine design and building. PC or PLC control.
-Jigs, fixtures, gages, and tooling
-MIG and TIG Welding, OD/ID Grinding, Surface Grinding, CNC Milling, CNC Turning
-All threading is single point and performed on a CNC Lathe. ID and OD threads are machined in one set up, whenever possible, to ensure no run out and parallelism. ID minor diameters are bored and single point threaded. Not just drilled and tapped!!!!
-My adapters are custom made and not mass produced, so, they are not the least expensive.
