UZI TOP COVER OPTIC RAILS

UZI TOP COVER OPTIC RAILS

5/8" Tall by 3.3" long type:

Rails are manufactured to mil. spec. 1913 specifications. They are for the Full Size UZI. Your cocking knob works just like it always did. The Top Covers have a milled pad for the rail system to nest and locate. The milled pad is parallel with your barrel. Rail is held on by two 10-32 Grade Eight Socket Flat Head Screws. Thread lock is applied to the screws and the screws can be tack welded on as well. Dark Parkarized finish.

1 3/4" Small Optic Rails:

Optic rails are 1 3/4" long manufactured to mil. spec. 1913 specifications. The rail is located in two .300 diameter x .020" deep counter bores in the top cover. Two 10-32 grade 8 tapered flat head screws hold it on. Thread lock is applied to the screws and the screws can be tack welded on as well. The rail base is actually a slip fit into the top cover counter bores. The counter bored nests are parallel with your barrel therefore so is your rail. Dark Parkarized finish.

I can manufacture both style rails so you can use the peep's as well as the optics. These cost a little more. e-mail me what you're looking for....

Steel construction (4140)

I take your Top Cover and install the 3.3" Optic Rail. (Full size UZI's) $120.00 Add $15.00 for a short rail that will allow you to use the peep sights if you remove the optic from the rail. Add $40.00 for a see thru mount that will allow the use of a optic rail and the peep sights. Be sure to use a tracking type of shipment to me. (see thru pictures below)

I take your top cover and install the 1 3/4" Optic rail (Full size, Mini's and Micro's) $145.00 Add $60.00 for a see thru mount that will allow the use of a optic rail and the peep sights. Be sure to use a tracking type of shipment to me. (see thru pictures below)

Re Parkarize your top cover $30.00 (If you purchased a rail)

PayPal +3.3%, Money Order, or check and I wait 10 days.

Click here to see a easy way of removing the "slop" between your Top Cover and your Receiver